Philips Car Speaker HTD3510 User Manual

Always there to help you  
Register your product and get support at  
HTD3510  
HTD3540  
HTD3570  
Question?  
Contact  
Philips  
User manual  
 
Contents  
1 Important  
Safety  
2
2
3
3
3
4
7
Product specifications  
20  
22  
24  
25  
Care for your product  
Care of the environment  
Copyright  
8 Troubleshooting  
9 Language code  
10 Index  
Compliance  
2 Your home theater  
Main unit  
4
4
4
6
Remote control  
Connectors  
3 Connect and set up  
Connect speakers  
7
7
8
Connect toTV  
Connect audio fromTV and other devices 9  
Set up speakers  
Set up EasyLink (HDMI-CEC control)  
10  
10  
4 Use your home theater  
Discs  
12  
12  
13  
14  
14  
15  
15  
16  
Data files  
USB storage devices  
Audio, video, and picture options  
Radio  
MP3 player  
Choose sound  
5 Change settings  
Language settings  
16  
16  
17  
17  
17  
18  
18  
18  
Picture and video settings  
Audio settings  
Parental control settings  
Display settings  
Energy saving settings  
Restore default settings  
6 Update software  
19  
19  
19  
Check software version  
Update software through USB  
EN  
1
 
Risk of injury or damage to the home theater!  
1 Important  
For wall-mountable products, use only the  
supplied wall mount bracket. Secure the  
wall mount to a wall that can support the  
combined weight of the product and the  
wall mount. Koninklijke Philips Electronics  
N.V. bears no responsibility for improper  
wall mounting that results in accident,  
injury or damage.  
Read and understand all instructions before you  
use your home theater. If damage is caused by  
failure to follow instructions, the warranty does  
not apply.  
For speakers with stands, use only the  
supplied stands. Secure the stands to the  
speakers tightly. Place the assembled stands  
on flat, level surfaces that can support the  
combined weight of the speaker and stand.  
Never place the product or any objects  
on power cords or on other electrical  
equipment.  
Safety  
Risk of electric shock or fire!  
Never expose the product and accessories  
to rain or water. Never place liquid  
containers, such as vases, near the product.  
If liquids are spilt on or into the product,  
disconnect it from the power outlet  
immediately. Contact Philips Consumer  
Care to have the product checked before  
use.  
If the product is transported in  
temperatures below 5°C, unpack the  
product and wait until its temperature  
matches room temperature before  
connecting it to the power outlet.  
Visible and invisible laser radiation when  
open.Avoid exposure to beam.  
Do not touch the disc optical lens inside  
the disc compartment.  
Parts of this product can be made of  
glass. Handle with care to avoid injury and  
damage.  
Never place the product and accessories  
near naked flames or other heat sources,  
including direct sunlight.  
Never insert objects into the ventilation  
slots or other openings on the product.  
Where the mains plug or an appliance  
coupler is used as the disconnect device,  
the disconnect device shall remain readily  
operable.  
Batteries (battery pack or batteries  
installed) shall not be exposed to excessive  
heat such as sunshine, fire or the like.  
Disconnect the product from the power  
outlet before lightning storms.  
Risk of overheating!  
Never install this product in a confined  
space.Always leave a space of at least four  
inches around the product for ventilation.  
Ensure curtains or other objects never  
cover the ventilation slots on the product.  
When you disconnect the power cord,  
always pull the plug, never the cable.  
Risk of contamination!  
Do not mix batteries (old and new or  
carbon and alkaine, etc.).  
Danger of explosion if batteries are  
incorrectly replaced. Replace only with the  
same or equivalent type.  
Remove batteries if they are exhausted or  
if the remote control is not to be used for  
a long time.  
Batteries contain chemical substances, they  
should be disposed of properly.  
Risk of short circuit or fire!  
Before you connect the product to the  
power outlet, ensure that the power  
voltage matches the value printed on the  
back or bottom of the product. Never  
connect the product to the power outlet if  
the voltage is different.  
2
EN  
 
 
Risk of swallowing batteries!  
Care of the environment  
The product/remote control may contain  
a coin/button type battery, which can be  
swallowed. Keep the battery out of reach  
of children at all times! If swallowed, the  
battery can cause serious injury or death.  
Severe internal burns can occur within two  
hours of ingestion.  
Your product is designed and manufactured  
with high quality materials and components,  
which can be recycled and reused.  
If you suspect that a battery has been  
swallowed or placed inside any part of the  
body, seek immediate medical attention.  
When you change the batteries, always  
keep all new and used batteries out of  
reach of children. Ensure that the battery  
compartment is completely secure after  
you replace the battery.  
When this crossed-out wheeled bin symbol  
is attached to a product it means that the  
product is covered by the European Directive  
2002/96/EC. Please inform yourself about the  
local separate collection system for electrical  
and electronic products.  
Please act according to your local rules and  
do not dispose of your old products with your  
normal household waste.  
If the battery compartment cannot be  
completely secured, discontinue use of the  
product. Keep out of reach of children and  
contact the manufacturer.  
Correct disposal of your old product helps to  
prevent potential negative consequences for the  
environment and human health.  
This is CLASS II apparatus with double  
insulation, and no protective earth provided.  
Your product contains batteries covered by the  
European Directive 2006/66/EC, which cannot  
be disposed with normal household waste.  
Please inform yourself about the local rules on  
separate collection of batteries because correct  
disposal helps to prevent negative consequences  
for the environmental and human health.  
Care for your product  
Do not insert any objects other than discs  
into the disc compartment.  
Do not insert warped or cracked discs into  
the disc compartment.  
Remove discs from the disc compartment  
if you are not using the product for an  
extended period of time.  
Copyright  
Use only microfiber cloth to clean the  
product.  
This item incorporates copy protection  
technology that is protected by U.S. patents  
and other intellectual property rights of  
Rovi Corporation. Reverse engineering and  
disassembly are prohibited.  
EN  
3
 
   
2 Your home  
theater  
Compliance  
This product complies with the radio  
interference requirements of the European  
Community.  
Congratulations on your purchase, and  
welcome to Philips!To fully benefit from the  
support that Philips offers, register your home  
Main unit  
a Disc compartment  
b Display panel  
c
(Open/Close)  
Open or close the disc compartment.  
d
(Play/Pause)  
Start, pause or resume play.  
e SOURCE  
Select an audio or video source for the  
home theater.  
f
(Standby-On)  
Switch the home theater on or to standby.  
Remote control  
This section includes an overview of the  
remote control.  
4
EN  
 
   
AUDIO SOURCE: Select an audio  
input source.  
RADIO: Switch to FM radio.  
USB: Switch to USB storage device.  
a
b
q
p
o
c Navigation buttons  
Navigate menus.  
In video mode, press left or right to  
fast backward or fast forward; press  
up or down to slow forward or slow  
backward.  
In radio mode, press left or right to  
search a radio station; press up or  
down to fine tune a radio frequency.  
c
d
d OK  
Confirm an entry or selection.  
n
e
e
f
g
h
BACK  
Return to a previous menu screen.  
f
g
+/-  
m
l
Increase or decrease volume.  
h
(Mute)  
Mute or restore volume.  
/
(Previous/Next)  
i
j
Skip to the previous or next track,  
chapter or file.  
In radio mode, select a preset radio  
station.  
k
i Numeric buttons  
Select an item to play.  
j SOUND  
Select a sound mode.  
k SURR  
Select surround sound or stereo sound.  
a
(Standby-On)  
Switch the home theater on or to  
standby.  
When EasyLink is enabled, press  
and hold for at least three seconds  
to switch all connected HDMI CEC  
compliant devices to standby.  
l
m
n
(Play/Pause)  
Start, pause or resume play.  
(Stop)  
Stop play.  
OPTIONS  
Access more play options while playing a  
disc or a USB storage device.  
b Source buttons  
DISC: Switch to disc source.Access  
or exit the disc menu when you play  
a disc.  
EN  
5
 
o
p
(Open/Close)  
Open or close the disc compartment.  
b SPEAKERS  
Connect to the supplied speakers and  
subwoofer.  
(Home)  
Access the home menu.  
c VIDEO OUT  
Connect to the composite video input on  
theTV.  
q AUDIO SYNC  
Select an audio language or channel.  
Press and hold to access audio delay  
setting, then press Navigation buttons  
(left/right) to delay the audio to match  
the video.  
d AUDIO IN-AUX  
Connect to an analog audio output on the  
TV or an analog device.  
e DIGITAL IN-OPTICAL  
Connect to an optical audio output on the  
TV or a digital device.  
Connectors  
f HDMI OUT (ARC)  
Connect to the HDMI input on theTV.  
This section includes an overview of the  
connectors available on your home theater.  
g FM ANTENNA  
Connect the supplied antenna for radio  
reception.  
Front  
a
(USB)  
Audio, video or picture input from a USB  
storage device.  
b AUDIO IN  
Audio input from an MP3 player (3.5mm  
jack).  
Back connectors  
a AC MAINS  
Fixed AC power.  
6
EN  
 
   
3 Connect and set  
up  
SUB  
FRONT  
LEFT  
FRONT  
RIGHT  
FRONT  
WOOFER  
CENTER  
This section helps you connect your home  
theater to aTV and other devices, and then set  
it up.  
For information about the basic connections  
of your home theater and accessories, see the  
quick start guide.  
Note  
REAR  
LEFT  
REAR  
RIGHT  
For identification and supply ratings, see the type plate  
at the back or bottom of the product.  
Before you make or change any connections, make sure  
that all devices are disconnected from the power outlet.  
*The actual speaker shapes may vary from the  
illustration above.  
Note  
Connect speakers  
Surround sound depends on factors such as room  
shape and size, type of wall and ceiling, windows and  
reflective surfaces, and speaker acoustics. Experiment  
with the speaker positions to find the optimum setting  
for you.  
The speaker cables are color-coded for easy  
connection.To connect a speaker to your home  
theater, match the color on the speaker cable to  
the color on the connector.  
Follow these general guidelines for speakers  
placement.  
Speaker position plays a critical role in setting  
up a surround sound effect. For best effect,  
position all the speakers towards the seating  
position and place them close to your ear level  
(seated).  
1 Seating position:  
This is the center of your listening area.  
2 FRONT CENTER (front center) speaker:  
Place the center speaker directly in front of  
the seating position, either above or below  
yourTV.  
3 FRONT LEFT (front left) and FRONT  
RIGHT (front right) speakers:  
Place the left and right speakers in the  
front, and at equal distance from the center  
speaker. Make sure that the left, right, and  
the center speakers are at equal distance  
from your seating position.  
EN  
7
 
4 REAR LEFT (rear left) and REAR RIGHT  
(rear right) speakers:  
2 On yourTV, turn on HDMI-CEC  
operations. For details, see theTV user  
manual.  
Place the rear surround speakers to the  
left and right side of your seating position,  
either in line with it or slightly behind it.  
up EasyLink (HDMI-CEC control)' on  
page 10)  
5 SUBWOOFER (subwoofer):  
Place the subwoofer at least one meter  
to the left or right of theTV. Leave about  
10-centimeter clearance from the wall.  
manually. (see 'Set up the audio' on page  
11)  
Connect toTV  
Connect your home theater to aTV to watch  
videos.You can listen to theTV audio through  
your home theater speakers.  
Use the best quality connection available on  
your home theater andTV.  
Option 2: Connect toTV through  
standard HDMI  
Best quality video  
Option 1: Connect toTV through  
HDMI (ARC)  
If yourTV is not HDMI ARC compliant, connect  
your home theater to theTV through a  
standard HDMI connection.  
Best quality video  
Your home theater supports HDMI version  
with Audio Return Channel (ARC). If yourTV  
is HDMI ARC compliant, you can hear theTV  
audio through your home theater by using a  
single HDMI cable.  
TV  
TV  
1 Using a High Speed HDMI cable, connect  
the HDMI OUT (ARC) connector on your  
home theater to the HDMI connector on  
theTV.  
'Connect audio fromTV and other devices'  
on page 9).  
1 Using a High Speed HDMI cable, connect  
the HDMI OUT (ARC) connector on  
your home theater to the HDMI ARC  
connector on theTV.  
3 On yourTV, turn on HDMI-CEC  
operations. For details, see theTV user  
manual.  
The HDMI ARC connector on theTV  
might be labeled differently. For details,  
see theTV user manual.  
8
EN  
 
 
up EasyLink (HDMI-CEC control)' on  
page 10)  
3 When you watchTV programs, press  
SOURCE on your home theater  
repeatedly to select the correct audio  
input.  
4 When you watch videos, switch yourTV to  
the correct video input. For details, see the  
TV user manual.  
manually. (see 'Set up the audio' on page  
11)  
Connect audio fromTV and  
other devices  
Note  
Play audio fromTV or other devices through  
your home theater speakers.  
Use the best quality connection available on  
yourTV, home theater, and other devices.  
If yourTV has a DVI connector, you can use an HDMI/  
DVI adapter to connect toTV. However, some of the  
features may not be available.  
Note  
Option 3: Connect to theTV through  
composite video  
required (see 'Option 1: Connect toTV through HDMI  
(ARC)' on page 8).  
Basic quality video  
If yourTV does not have HDMI connectors, use  
a composite video connection.A composite  
connection does not support high-definition  
video.  
Option 1: Connect audio through a  
digital optical cable  
TV  
Best quality audio  
TV  
1 Using a composite video cable, connect  
the VIDEO OUT connector on your  
home theater to the VIDEO IN connector  
on theTV.  
1 Using an optical cable, connect the  
OPTICAL connector on your home  
theater to the OPTICAL OUT connector  
on theTV or other device.  
The composite video connector might  
be labeled AV IN, COMPOSITE, or  
BASEBAND.  
The digital optical connector might be  
'Connect audio fromTV and other devices'  
on page 9).  
labeled SPDIF or SPDIF OUT.  
EN  
9
 
 
Option 2: Connect audio through  
analog audio cables  
Set up EasyLink (HDMI-CEC  
control)  
Basic quality audio  
This home theater supports Philips EasyLink,  
which uses the HDMI-CEC (Consumer  
Electronics Control) protocol. EasyLink-  
compliant devices that are connected through  
HDMI can be controlled by a single remote  
control.  
AUDIO IN- AUX  
VCR  
Note  
Depending on the manufacturer, HDMI-CEC is known  
by many names. For information on your device, see  
the user manual of the device.  
Philips does not guarantee 100% interoperability with  
all HDMI-CEC devices.  
1 Using an analog cable, connect the AUX  
connectors on your home theater to the  
AUDIO OUT connectors on theTV or  
other device.  
Before you start  
Connect your home theater to the HDMI-  
CEC compliant device through HDMI  
connection.  
Make the necessary connections described  
in the quick start guide, and then switch  
theTV to the correct source for your  
home theater.  
Set up speakers  
Set up the speakers manually to experience  
customized surround sound.  
Before you start  
Make the necessary connections described in  
the quick start guide, and then switch theTV to  
the correct source for your home theater.  
Enable EasyLink  
1 Press (Home).  
1 Press (Home).  
2 Select [Setup], and then press OK.  
3 Select [Audio] > [Speaker Setup].  
2 Select [Setup], and then press OK.  
3 Select [Video], and then press OK.  
4 Press the Navigation buttons and OK to  
4 Select [HDMI Setup] > [EasyLink Setup]  
select and change:  
> [EasyLink] > [On].  
[SpeakersVolume]: Set the volume  
level of each speaker.  
5 On yourTV and other connected devices,  
turn on HDMI-CEC control. For details, see  
the user manual of theTV or other devices.  
[Speakers Delay]: Set the delay time  
for speakers which are placed closer to  
the seating position in order to obtain  
equal audio transmission from all the  
speakers.  
On yourTV, set the audio output to  
'Amplifier' (instead ofTV speakers).  
For details, see theTV user manual.  
10 EN  
 
 
1 Press (Home).  
EasyLink controls  
2 Select [Setup], and then press OK.  
3 Select [Video], and then press OK.  
With EasyLink, you can control your home  
theater,TV, and other connected HDMI-CEC  
compliant devices with a single remote control.  
4 Select [HDMI Setup] > [EasyLink Setup]  
> [Sys Audio Control] > [On].  
[OneTouch Play] (One-touch play): If one-  
touch play is enabled, press (Standby-  
On) on the remote control of your home  
theater to wake up theTV from standby.  
[OneTouch Standby] (One-touch  
standby): If one-touch standby is enabled,  
your home theater can switch to standby  
with the remote control of theTV or other  
HDMI-CEC devices.  
To play the audio from theTV  
speakers, select [Off], and skip the  
following steps.  
5 Select [HDMI Setup] > [EasyLink Setup]  
> [Audio Mapping].  
6 Follow the onscreen instructions to map  
the connected device to the audio inputs  
on your home theater.  
[Sys Audio Control] (System audio  
control): If system audio control is enabled,  
the audio of the connected device is  
output through your home theater  
speakers automatically when you play the  
device.  
[Audio Mapping] (Audio input mapping):If  
(see 'Set up the audio' on page 11)  
If you connect your home theater  
to theTV through an HDMI ARC  
connection, make sure that theTV  
audio is mapped to the ARC input on  
your home theater.  
Note  
To change the EasyLink control settings, press  
(Home), select [Setup] > [Video] > [HDMI Setup] >  
[EasyLink Setup] > [EasyLink].  
Set up the audio  
If you cannot hear the audio output of a  
connected device through your home theater  
speakers, do the following:  
on all the devices, (see 'Set up EasyLink  
(HDMI-CEC control)' on page 10) and  
on yourTV, set the audio output to  
"Amplifier" (instead ofTV speakers). For  
details, see theTV user manual, and  
setup the EasyLink audio control.  
EN 11  
 
 
Play buttons  
4 Use your home  
theater  
Button  
Action  
Navigation  
buttons  
OK  
Navigate menus.  
Confirm an entry or selection.  
This section helps you use the home theater to  
play media from a wide range of sources.  
(Play/  
Start, pause or resume play.  
Pause)  
Before you start  
Stop play.  
Make the necessary connections described  
in the Quick start guide and the user  
manual.  
/
/
Skip to the previous or next  
track, chapter or file.  
Fast backwards or fast forwards.  
Press repeatedly to change the  
search speed.  
Switch theTV to the correct source for  
the home theater.  
Navigation  
buttons  
(left/right)  
Navigation  
buttons  
(up/down)  
DISC  
Rotate the picture clockwise or  
counter-clockwise.  
1 Press (Home).  
» The home menu is displayed.  
2 Press the Navigation buttons and OK to  
Flip the picture vertically or  
horizontally.  
select the following:  
[DISC]: Start disc play.  
[USB]:Access the USB content  
browser.  
Access or exit the disc menu.  
Select an audio language or  
channel.  
AUDIO  
SYNC  
[Setup]:Access menus to change video,  
audio and other settings.  
files. (see 'Audio, video, and  
picture options' on page 14)  
3 Press (Home) to exit.  
OPTIONS  
Discs  
Your home theater can play DVDs,VCDs, and  
CDs. It can also play discs that you’ve made at  
home, such as CD-R discs of photos and music.  
Synchronize picture and sound  
If the audio and video are not synchronized,  
delay the audio to match the video.  
1 Insert a disc into the home theater.  
1 While playing video, press and hold  
2 If the disc does not play automatically, press  
DISC or select [DISC] from the home  
menu.  
AUDIO SYNC.  
» Audio sync menu is displayed.  
2 Press the Navigation buttons (left/right) to  
synchronize the audio with the video, and  
then press OK.  
'Play buttons' on page 12).  
Note  
Picture and sound can be synchronized through the  
setup menu, press  
(Home), select [Setup] > [Audio]  
> [Audio Sync].  
12 EN  
 
     
1 Press  
OPTIONS, and select a subtitle  
language under SUBTITLE option.  
Display menu forVCD and SVCD  
Display the content menu onVCD and SVCD  
discs.  
2 For DivX videos, if the subtitles do not  
appear correctly, continue the following  
steps to change the character set.  
1 Press (Home).  
3 Press (Home).  
2 Select [Setup], and then press OK.  
3 Select [Preferences] > [PBC].  
4 Select [Setup], and then press OK.  
5 Select [Preferences] > [DivX Subtitle].  
[PBC]: Enable or disable the content  
menu navigation ofVCD and SVCD  
discs with Play Back Control feature.  
6 Select a character set that supports the  
subtitle.  
Character  
Set  
Language  
Data files  
[Standard] English,Albanian, Danish, Dutch,  
Finnish, French, Gaelic, German,  
Italian, Kurdish (Latin), Norwegian,  
Portuguese, Spanish, Swedish and  
Turkish  
Your home theater can play pictures, audio and  
video files contained in a disc or a USB storage  
'File formats' on page 20).  
[Central  
Eur]  
Albanian, Croat, Czech, Dutch,  
English, German, Hungarian, Irish,  
Polish, Romanian, Slovak, Slovene  
and Sorbian  
1 Play the files from a disc or USB storage  
device.  
2 To stop play, press  
.
[Cyrillic]  
[Greek]  
Bulgarian, Belorussian, English,  
Macedonian, Moldavian, Russian,  
Serbian and Ukrainian  
To resume the video from where you  
stopped, press (Play).  
To play the video from the start, press  
OK.  
Greek  
Note  
VOD code for DivX  
To play DivX DRM protected files, connect your home  
theater to aTV through an HDMI cable.  
Before you purchase DivX videos and play  
them on your home theater, register the home  
code.  
Subtitles  
1 Press (Home).  
If your video has subtitles in multiple languages,  
select a subtitle language.  
2 Select [Setup], and then press OK.  
3 Select [General] > [DivX(R)VOD Code].  
» The DivXVOD registration code for  
your home theater is displayed.  
Note  
Make sure that the subtitle file has the exact same  
name as the video file. For example, if the video file is  
named 'movie.avi', name the subtitle file as 'movie.srt'  
or 'movie.sub'.  
Your home theater supports the following file formats:  
.srt, .sub, .txt, .ssa, .ass, smi, and .sami. If the subtitles do  
not appear correctly, change the character set.  
EN 13  
 
   
Video options  
USB storage devices  
1 While viewing video, press  
OPTIONS.  
Enjoy pictures, audio, and video stored on a  
USB storage device such as an MP4 player or  
digital camera.  
» The video options menu is displayed.  
Depending on the video source, some  
options are not available.  
What you need  
2 Press the Navigation buttons and OK to  
A USB storage device that is formatted  
for FAT or NTFS file system, and complies  
with the Mass Storage Class.  
select and change:  
[Info]: Display the play information.  
[PBC]: Enable or disable the content  
menu navigation ofVCD and SVCD  
discs with Play Back Control feature.  
[Aspect ratio]: Select a display ratio of  
picture that matches yourTV screen.  
[Subtitle]: Select subtitle language for  
video.  
formats. (see 'File formats' on page 20)  
Note  
If you use a USB extension cable, USB HUB or USB  
multi-reader, the USB storage device may not be  
recognized.  
You can connect to a digital camera if they can play the  
files without using a special computer program.  
[Angle]: Select video scenes recorded  
in different camera angels.  
Picture options  
1 Connect a USB storage device to the  
(USB) connector on your home theater.  
1
While viewing pictures, press  
OPTIONS.  
2 Press USB.  
2 Press the Navigation buttons and OK to  
» A content browser is displayed.  
select and change:  
[Color]:Turn on or off the color mode.  
[Photo preview]: Display the thumbnail  
of photos.  
[Repeat]: Select a repeat mode for  
slideshow.  
3 Select a file and then press OK.  
4 Use the play buttons to control play.  
Audio, video, and picture  
options  
3 Press  
/
to go to previous or next  
preview page.  
4 Press the Navigation buttons and OK to  
Use advanced features when you play audio,  
video, or media files from a disc or a USB  
storage device.  
select a picture.  
Musical slideshow  
If the picture and audio files are from the same  
disc or USB storage device, you can create a  
musical slideshow.  
Audio options  
1 While playing audio, press  
OPTIONS  
repeatedly to select a repeat mode.  
1 Select an audio track and then press OK.  
2 Press  
BACK and then go to the picture  
folder.  
3 Select a picture and then press OK to  
start the slideshow.  
14 EN  
 
       
4 Press to stop slideshow.  
Button  
Action  
5 Press again to stop music.  
RADIO  
Manual:  
1) In radio mode, press RADIO.  
2) When a radio frequency  
blinks, press OK to store  
the radio station.  
Radio  
3) Repeat step 1 and 2 to  
store other stations.  
Automatic:  
Listen to FM radio on your home theater, and  
store up to 40 radio stations.  
In radio mode, press and hold  
RADIO for three seconds to  
reinstall all the available radio  
station.  
Note  
AM and digital radio are not supported.  
If no stereo signal is detected, you are prompted to  
install the radio stations again.  
1 Connect the FM antenna to the FM  
Tuning grid  
ANTENNA on your home theater.  
For the best reception, place the  
antenna away from yourTV or other  
sources of radiation.  
In some countries, you can toggle the FM tuning  
grid between 50 kHz and 100 kHz.  
1 Press RADIO to switch to radio source.  
2 Press RADIO to switch to radio source.  
» If you have already installed the radio  
stations, the last channel that you  
listened to is played.  
2 Press  
.
3 Press and hold (Play) to toggle between  
50 kHz or 100 kHz.  
» If you have not installed any radio  
stations, the message AUTO  
MP3 player  
INSTALL...PRESS PLAY appears on  
the display panel. Press (Play).  
Connect a MP3 player to play audio files.  
3 Use the remote control to listen or to  
What you need  
change radio stations.  
An MP3 player.  
A 3.5mm stereo audio cable.  
Play buttons  
1 Using the 3.5mm stereo audio cable,  
connect the MP3 player to the AUDIO IN  
connector on your home theater.  
Button  
Action  
/
or  
Select a preset radio station.  
If you use 6.5mm stereo audio cable,  
connect the MP3 player to your  
home theater using a 3.5mm - 6.5mm  
converter jack.  
Alphanumeric  
buttons  
Navigation  
buttons  
Left/Right: Search for a radio  
station.  
2 Press AUDIO SOURCE repeatedly until  
Up/Down: Fine tune a radio  
frequency.  
AUDIO IN appears on the display panel.  
Press to stop the installation of  
radio stations.  
3 Press the buttons on the MP3 player to  
select and play audio files.  
Press and hold to erase the  
preset radio station.  
EN 15  
 
 
5 Change settings  
Choose sound  
This section helps you choose the ideal sound  
for your video or music.  
The home theater settings are already  
configured for optimal performance. Unless  
you have a reason to change a setting, we  
recommend that you keep the default setting.  
Sound mode  
Select predefined sound modes to suit your  
video or music.  
Note  
1 Press SOUND repeatedly to select a  
You cannot change a setting that is grayed out.  
sound mode.  
To return to the previous menu, press  
BACK. To  
exit the menu, press  
(Home).  
MOVIE: Enjoy a cinematic audio  
experience, specially enhanced for  
movies.  
MUSIC: Recreate the original recording  
environment of your music, in the  
studio or at a concert.  
ORIGINAL: Experience the original  
sound of your movies and music,  
without added sound effects.  
NEWS: Hear every word with  
optimized speech and clear vocals.  
GAMING: Enjoy thrilling arcade  
sounds, ideal for action-packed video  
games or loud parties.  
Language settings  
Onscreen display language  
1 Press (Home).  
2 Select [Setup] and then press OK.  
3 Select [General] and then press OK.  
[OSD Language]: Select a display  
language for menu.  
Disc language  
Surround sound mode  
1 Press (Home).  
Experience an immersive audio experience with  
surround sound modes.  
2 Select [Setup] and then press OK.  
3 Select [Preferences] and then press OK.  
1 Press SURR repeatedly to select a  
[Audio]: Select an audio language for  
discs.  
[Subtitle]: Select a subtitle language  
for discs.  
[Disc Menu]: Select a menu language  
for discs.  
surround mode.  
MULTI-CH:Traditional 5.1 channel for  
a more relaxing cinematic experience.  
STEREO:Two-channel stereo sound.  
Ideal for listening to music.  
Note  
Note  
If the audio source is a 2.1 channel. multi-channel mode  
will output 5-channel stereo sound.  
If your preferred disc language is not available, select  
[Others] from the list, and enter the 4-digit language  
'Language code' on page 24).  
If you select a language that is not available on a disc,  
the home theater uses the default language of the disc.  
16 EN  
 
   
3 Select [Audio] and then press OK.  
Picture and video settings  
[HDMI Audio]: Set the HDMI audio  
output from yourTV, or disable HDMI  
audio output from theTV.  
1 Press (Home).  
[Audio Sync]: Set audio delay if audio  
and video cannot be matched.  
[Speaker Setup]: Set up speakers for  
best surround sound experience.  
[Sound Mode]: Select a predefined  
sound mode to suit your video and  
music.  
2 Select [Setup] and then press OK.  
3 Select [Video] and then press OK.  
[TV System]: Select a video format  
supported by theTV.  
[TV Display]: Select a picture format  
to fit theTV screen.  
[Picture Setting]: Select animation for  
the slide show.  
[HD JPEG]: Enable this feature to view  
high-definition JPEG pictures through  
HDMI connection.  
[Treble/Bass]: Set the high frequency  
(treble) and low frequency (bass)  
settings of the home theater.  
[Night Mode]: Select quiet or full  
dynamic sound. Night mode decreases  
the volume of loud sounds and  
increases volume of sounds such as  
speech.Applicable to Dolby Digital  
encoded DVD discs only.  
[HDMI Setup]:Access the following  
setup through HDMI connection.  
* [Resolution]: Select a resolution for  
high definition videos.  
* [HDMI Deep Color]: Recreate the  
natural world on yourTV screen by  
displaying vivid images using billion  
colors.Your home theater must be  
connected to a Deep Color enabled  
TV through an HDMI cable.  
Parental control settings  
Password and Ratings  
* [Wide Screen]: Select a display  
format for wide screen videos.  
* [EasyLink Setup]: Set up EasyLink  
control (see 'Set up EasyLink (HDMI-  
CEC control)' on page 10).  
1 Press (Home).  
2 Select [Setup] and then press OK.  
3 Select [Preferences] and then press OK.  
[Password]: Set or change your  
password for parental control access.  
If you do not have a password or  
have forgotten your password, enter  
000000.  
[Parental Control]: Enable maturity-  
based restricted access for playback  
of DVD-video that are recorded with  
ratings.To play discs irrespective of the  
rating, select [8 Adult].  
Note  
If you change a setting, make sure that theTV supports  
the new setting.  
Audio settings  
Lock disc  
1 Press (Home).  
2 Select [Setup] and then press OK.  
1 Press (Home).  
2 Select [Setup] and then press OK.  
EN 17  
 
 
3 Select [General] and then press OK.  
4 Follow the onscreen message to restore  
default setting.  
[Disc Lock]: Lock the disc to restrict  
play.You can lock up to 20 discs on  
your home theater.  
» Your home theater is reset to its  
default settings, except for password,  
parental control and disc lock settings.  
Note  
To play a locked disc, follow the onscreen instructions  
to enter the password, and then press OK.  
Display settings  
1 Press (Home).  
2 Select [Setup] and then press OK.  
3 Select [Preferences] and then press OK.  
[PBC]: Enable or disable the content  
menu navigation ofVCD and SVCD  
discs with Play Back Control feature.  
Energy saving settings  
1 Press (Home).  
2 Select [Setup] and then press OK.  
3 Select [General] and then press OK.  
[Display Dim]: Set the brightness of  
the home theater front panel display.  
[SleepTimer]: Switch the home  
theater to standby mode after the  
elapsed time.  
[Auto Standby]: Switch the home  
theater to standby mode after  
18 minutes of no activity when in disc  
or USB mode.  
Restore default settings  
1 Press (Home).  
2 Select [Setup] and then press OK.  
3 Select [Preferences] > [Default], and then  
press OK.  
18 EN  
 
 
Step 1: Download the latest software  
6 Update software  
1 Connect a USB flash drive to your  
computer.  
Philips continually tries to improve its products.  
To get the best features and support, update  
your home theater with the latest software.  
2 In your web browser, go to  
3 At the Philips Support website, find your  
product and locate the Software and  
drivers.  
Compare the version of your current  
software with the latest version on  
» The software update is available as a  
zip file.  
is lower than the latest version available on the  
Philips support website, upgrade your home  
theater with the latest software.  
4 Save the zip file in the root directory of  
your USB flash drive.  
5 Use the archive utility to extract the  
Caution  
software update file in the root directory.  
Do not install a lower version of software than the  
current version installed on your product. Philips is not  
liable for problems caused due to software downgrade.  
6 Disconnect the USB flash drive from your  
computer.  
Step 2: Update the software  
Caution  
Check software version  
Do not switch off the home theater or remove the  
USB flash drive during the update.  
Check the version of the current software  
installed on your home theater.  
1 Press (Home).  
1 Connect the USB flash drive containing the  
downloaded file to your home theater.  
2 Select [Setup] and then press OK.  
Make sure that the disc compartment  
is closed and there is no disc inside.  
3 Select [Preferences] > [Version Info].  
» The software version is displayed.  
2 Switch yourTV to the correct source for  
your home theater.  
3 Follow the onscreen instructions to  
Update software through  
USB  
confirm the update.  
» Once complete, the home theater  
automatically switches off and restarts.  
If it does not, disconnect the power  
cord for a few seconds and then  
reconnect it.  
What you need  
A USB flash drive that is FAT or NTFS-  
formatted, with at least 75MB of memory.  
Do not use a USB hard drive.  
A computer with Internet access.  
An archive utility that supports the ZIP file  
format.  
EN 19  
 
Amplifier  
7 Product  
specifications  
Total output power:  
300W RMS (30%THD)  
Frequency response: 20 Hz-20 kHz / ±3 dB  
Signal-to-noise ratio: > 65 dB (CCIR) /  
(A-weighted)  
Note  
Input sensitivity:  
Specifications and design are subject to change without  
notice.  
AUX: 2V  
AUDIO IN: 1V  
Video  
Region codes  
Signal system: PAL / NTSC/Multi  
HDMI output: 480i/576i, 480p/576p, 720p,  
1080i, 1080p  
The type plate on the back or bottom of the  
home theater shows which regions it supports.  
Country  
DVD  
Europe, United Kingdom  
Audio  
S/PDIF Digital audio input:  
Optical:TOSLINK  
Sampling frequency:  
Asia Pacific, Taiwan, Korea  
Latin America  
MP3: 32 kHz, 44.1 kHz, 48 kHz  
WMA: 44.1 kHz, 48 kHz  
Constant bit rate:  
MP3: 32 kbps - 320 kbps  
WMA: 64 kbps - 192 kbps  
Australia, New Zealand  
Russia, India  
Radio  
Tuning range:  
China  
Europe/Russia/China:  
FM 87.5-108 MHz (50 kHz)  
Asia Pacific/Latin America:  
FM 87.5-108 MHz (50/100 kHz)  
Media formats  
Signal-to-noise ratio: FM 50 dB  
Frequency response:  
FM 200 Hz-12.5 kHz / ±6 dB  
DVD-Video, DVD+R/+RW, DVD-R/-RW,  
DVD+R/-R DL, CD-R/CD-RW,Audio CD,  
Video CD/SVCD, Picture files, MP3 media,  
WMA media, DivX media, USB storage  
device  
USB  
Compatibility: Hi-Speed USB (2.0)  
Class support: USB Mass Storage Class  
(MSC)  
File formats  
File system: FAT16, FAT32, NTFS  
USB port: 5V , 500mA  
Audio: .mp3, .wma  
Video: .avi, .divx, .mpg, .mpeg,  
Picture: .jpg, .jpeg  
20 EN  
 
                 
Dimensions (WxHxD):  
Main unit  
HTD3510: 85 x 88 x 83 mm  
(front/rear)  
HTD3540: 85 x 159 x 80 mm (front);  
220 x 1006 x 220 mm (rear)  
HTD3570: 220 x 1006 x 220 mm  
(front/rear)  
Power supply:  
Europe/China/Russia/India:  
220-240V~, 50 Hz  
Latin America/Asia Pacific:  
110-240V~, 50-60 Hz  
Weight (front):  
Power consumption: 50 W  
Standby power consumption: ≤ 0.5 W  
Dimensions (WxHxD):  
360 x 58 x 325 mm  
HTD3510: 0.25 kg/each  
HTD3540: 0.35 kg/each  
HTD3570: 2.56 kg/each  
Weight (rear):  
Weight: 2.3 kg  
HTD3510: 0.25 kg/each  
HTD3540/HTD3570: 2.56 kg/each  
Subwoofer  
Cable length (front):  
Output power: 50 W RMS (30%THD)  
Impedance: 8 ohm  
Speaker drivers: 133 mm (5.25") woofer  
Dimensions (WxHxD):  
160 x 265 x 265 mm  
Weight: 2.50 kg  
HTD3510: 2.2 m  
HTD3540/HTD3570: 3.25 m  
Cable length (rear): 7.2 m  
Remote control batteries  
1 x AAA-R03-1.5V  
Cable length:  
HTD3510: 2.3 m  
HTD3540/HTD3570: 3.3 m  
Laser  
Type: Semiconductor laser GaAIAs (CD)  
Wave length: 650-662 nm (DVD),  
785-795 nm (CD)  
Speakers  
Center speaker:  
Output power: 6 mW (DVD),  
7 mW (VCD/CD)  
Beam divergence: 60 degrees.  
Output power: 50 W RMS (30%THD)  
Speaker impedance: 4 ohm  
Speaker drivers: 1 x 63.5 mm (2.5") full  
range  
Dimensions (WxHxD):  
Standby information  
HTD3510: 85 x 88 x 83 mm  
HTD3540/HTD3570:  
185 x 90 x 82 mm  
When the product remains inactive for  
18 minutes, it automatically switches to  
standby or networked standby.  
Weight:  
The power consumption in standby or  
networked standby is less than 0.5W.  
HTD3510: 0.26 kg  
HTD3540/HTD3570: 0.35 kg  
Cable length:  
HTD3510: 1.2 m  
HTD3540/HTD3570: 2.25 m  
Front/Rear speaker:  
Output power: 4 x 50 W RMS (30%THD)  
Speaker impedance: 4 ohm  
Speaker drivers: 1 x 63.5 mm (2.5") full range  
EN 21  
 
       
Sound  
8 Troubleshooting  
No sound from home theater speakers.  
'Connect audio fromTV and other devices'  
on page 9).  
settings (see 'Restore default settings' on  
page 18), then switch it off and switch on  
again.  
Warning  
Risk of electric shock. Never remove the casing of the  
product.  
To keep the warranty valid, never try to repair  
the product yourself.  
If you have problems using this product, check  
the following points before you request service.  
If you still have a problem, get support at  
On your home theater, press SOURCE  
repeatedly to select the correct audio  
input.  
Distorted sound or echo.  
If you play audio from theTV through the  
home theater, make sure that theTV is  
muted.  
Main unit  
The buttons on the home theater do not  
work.  
Audio and video are not synchronized.  
Disconnect the home theater from the  
power supply for a few minutes, then  
reconnect.  
1) Press and hold AUDIO SYNC.  
2) Press the Navigation buttons (left/right)  
within five seconds to synchronize the  
audio with the video.  
Picture  
No picture.  
Play  
Make sure that theTV is switched to the  
correct source for the home theater.  
Cannot play a disc.  
Clean the disc.  
No picture on aTV connected through HDMI.  
the type of disc (see 'Media formats' on  
page 20).  
Make sure that the HDMI cable is not  
faulty. If it is faulty, replace it with a new  
cable.  
Make sure that the home theater supports  
the region code of the disc.  
If the disc is a DVD±RW or DVD±R disc,  
make sure that it is finalized.  
'Picture and video settings' on page 17).  
Disc does not play high-definition video.  
Cannot play a DivX file.  
Make sure that the disc contains high-  
definition video.  
Make sure that theTV supports high-  
definition video.  
Make sure that the DivX file is encoded  
according to the 'HomeTheater Profile'  
with the DivX encoder.  
Make sure that the DivX file is complete.  
Use an HDMI cable to connect to theTV.  
DivX subtitles do not display correctly.  
'Subtitles' on page 13).  
22 EN  
 
         
'Subtitles' on page 13).  
Cannot read the contents of a USB storage  
device.  
Make sure that the format of the USB  
storage device is compatible with the  
home theater.  
Make sure that the file system on the USB  
storage device is supported by the home  
theater.  
'input invalid' or 'x' sign appears on theTV.  
The operation is not possible.  
EasyLink does not work.  
'Set up EasyLink (HDMI-CEC control)' on  
page 10).  
ForTVs from different manufacturers, the  
HDMI CEC could be called differently.  
Check theTV user manual on how to  
enable it.  
When you switch on theTV, the home theater  
automatically switches on.  
This behavior is normal when you are using  
Philips EasyLink (HDMI-CEC).To make the  
home theater work independently, switch  
off EasyLink.  
EN 23  
 
9 Language code  
Abkhazian  
Afar  
Afrikaans  
Amharic  
6566  
6565  
6570  
6577  
6582  
7289  
6583  
6569  
6589  
6590  
7783  
6665  
6669  
6678  
6672  
6673  
7866  
6683  
6682  
6671  
7789  
6983  
6765  
6772  
6769  
Inupiaq  
Irish  
Íslenska  
Italiano  
Ivrit  
Japanese  
Javanese  
Kalaallisut  
Kannada  
Kashmiri  
Kazakh  
Kernewek  
Khmer  
7375  
7165  
7383  
7384  
7269  
7465  
7486  
7576  
7578  
7583  
7575  
7587  
7577  
8287  
7589  
7586  
7579  
Pushto  
8083  
8285  
8185  
8277  
8279  
8278  
8377  
8371  
8365  
8367  
8382  
8378  
8381  
8368  
8373  
8373  
8376  
8379  
8384  
7882  
8385  
7073  
8387  
8383  
8386  
8476  
8489  
8471  
8465  
8484  
8469  
8472  
6679  
8473  
8479  
8483  
8478  
8482  
8475  
8487  
8571  
8575  
8582  
8590  
8673  
8679  
8765  
6789  
8779  
8872  
8973  
8979  
9085  
Russian  
Quechua  
Raeto-Romance  
Romanian  
Rundi  
Samoan  
Sango  
Sanskrit  
Sardinian  
Serbian  
Shona  
Arabic  
Armenian  
Assamese  
Avestan  
Aymara  
Azerhaijani  
Bahasa Melayu  
Bashkir  
Belarusian  
Bengali  
Bihari  
Bislama  
Bokmål, Norwegian  
Bosanski  
Brezhoneg  
Bulgarian  
Burmese  
Castellano, Español  
Catalán  
Chamorro  
Chechen  
Chewa; Chichewa; Nyanja7889  
Ё᭛  
Chuang; Zhuang  
Church Slavic; Slavonic 6785  
Chuvash  
Corsican  
Česky  
Shqip  
Sindhi  
Kinyarwanda  
Kirghiz  
Komi  
Sinhalese  
Slovensky  
Slovenian  
Somali  
Sotho; Southern  
South Ndebele  
Sundanese  
Suomi  
Swahili  
Swati  
Svenska  
Tagalog  
Tahitian  
Tajik  
Tamil  
Tatar  
Telugu  
Thai  
Tibetan  
Tigrinya  
Tonga (Tonga Islands)  
Tsonga  
Tswana  
Türkçe  
Turkmen  
Twi  
Uighur  
Ukrainian  
Urdu  
Uzbek  
Vietnamese  
Volapuk  
Walloon  
Welsh  
Wolof  
Xhosa  
Yiddish  
Yoruba  
Zulu  
Korean  
Kuanyama; Kwanyama 7574  
Kurdish  
Lao  
Latina  
Latvian  
Letzeburgesch;  
Limburgan; Limburger 7673  
Lingala  
Lithuanian  
Luxembourgish;  
Macedonian  
Malagasy  
Magyar  
Malayalam  
Maltese  
Manx  
Maori  
Marathi  
Marshallese  
Moldavian  
Mongolian  
Nauru  
Navaho; Navajo  
Ndebele, North  
Ndebele, South  
Ndonga  
Nederlands  
Nepali  
Norsk  
Northern Sami  
North Ndebele  
Norwegian Nynorsk;  
Occitan; Provencal  
Old Bulgarian; Old Slavonic 6785  
Oriya  
Oromo  
Ossetian; Ossetic  
Pali  
Panjabi  
Persian  
Polski  
Português  
7585  
7679  
7665  
7686  
7666  
7678  
7684  
7666  
7775  
7771  
7285  
7776  
7784  
7186  
7773  
7782  
7772  
7779  
7778  
7865  
7886  
7868  
7882  
7871  
7876  
7869  
7879  
8369  
7868  
7878  
7967  
9072  
9065  
6786  
6779  
6783  
6865  
6869  
6890  
6978  
6979  
6984  
6985  
6976  
7079  
7082  
7089  
7074  
Dansk  
Deutsch  
Dzongkha  
English  
Esperanto  
Estonian  
Euskara  
ꢀꢁꢁꢂꢃꢄꢅꢆ  
Faroese  
Français  
Frysk  
Fijian  
Gaelic; Scottish Gaelic 7168  
Gallegan  
Georgian  
Gikuyu; Kikuyu  
Guarani  
Gujarati  
Hausa  
Herero  
Hindi  
Hiri Motu  
Hrwatski  
Ido  
7176  
7565  
7573  
7178  
7185  
7265  
7290  
7273  
7279  
6779  
7379  
7982  
7977  
7983  
8073  
8065  
7065  
8076  
8084  
Interlingua (International)7365  
Interlingue  
Inuktitut  
7365  
7385  
24 EN  
 
 
10 Index  
L
language  
language code  
A
amplifier  
M
audio  
main unit  
overview  
specifications  
troubleshooting  
media formats  
MP3  
predefined modes  
specifications  
audio options  
C
connector  
care  
environment  
product  
connectors  
front connectors  
control  
O
options  
picture  
overview  
main unit  
remote control  
disc play  
main unit  
D
P
discs  
picture  
options  
audio options  
control buttons  
options  
troubleshooting  
picture options  
play  
play  
synchronize picture and sound  
time search  
titles  
display  
VCD/SVCD menu  
display panel  
discs  
radio  
troubleshooting  
product specifications  
R
radio  
F
FM antenna  
specifications  
tuning grid  
recycling  
region codes  
remote control  
batteries  
FM antenna  
H
HDMI  
overview  
repeat  
EN 25  
 
S
safety  
disposal  
use of the product  
sound  
predefined sound mode  
surround sound  
synchronize picture and sound  
troubleshooting  
sound mode  
speakers  
specifications  
surround sound  
subwoofer  
specifications  
synchronize picture and sound  
T
time search  
titles  
troubleshooting  
connection  
main unit  
picture  
play  
sound  
tuning grid  
U
USB  
format  
USB storage device  
options  
specifications  
V
video  
synchronize picture and sound  
video formats  
video options  
26 EN  
 
Manufactured under license from Dolby  
Laboratories. Dolby and the double-D symbol  
are trademarks of Dolby Laboratories.  
DivX , DivX Ultra , DivX Certified and  
associated logos are trademarks of Rovi  
Corporation or its subsidiaries and are used  
under license.  
DivX Ultra Certified to play DivX video  
with advanced features and premium content.  
ABOUT DIVXVIDEO: DivX is a digital video  
format created by DivX, LLC, a subsidiary  
of Rovi Corporation.This is an official DivX  
Certified device that plays DivX video.Visit  
divx.com for more information and software  
tools to convert your files into DivX videos.  
ABOUT DIVXVIDEO-ON-DEMAND:This  
DivX Certified device must be registered  
in order to play purchased DivXVideo-on-  
Demand (VOD) movies.To obtain your  
registration code, locate the DivXVOD section  
in your device setup menu. Go to vod.divx.com  
for more information on how to complete your  
registration.  
The terms HDMI and HDMI High-Definition  
Multimedia Interface, and the HDMI Logo are  
trademarks or registered trademarks of HDMI  
Licensing LLC in the United States and other  
countries.  
CLASS 1  
LASER PRODUCT  
27  
 
Specifications are subject to change without notice  
© 2014 Koninklijke Philips N.V. All rights reserved.  
Trademarks are the property of Koninklijke Philips N.V. or their respective owners.  
HTD3510/3540/3570_12_UM_V3.0  
 

Peavey Guitar EVH Wolfgang User Manual
Peerless Industries TV Mount ACC919 User Manual
Philips Carrying Case SJM3300 User Manual
Philips Car Stereo System AQ 6681 User Manual
Philips Car Video System 190WV7 User Manual
Philips Indoor Furnishings 57900 87 96 User Manual
Philips Indoor Furnishings 232520 User Manual
Philips MP3 Docking Station AJ301D User Manual
Planar Car Video System LC SERIES User Manual
Poulan Lawn Mower 181347 User Manual