Philips Car Speaker MMS 305 A 3500 User Manual

MMS 305/A 3.500 Acoustic Surround Power  
Instructions for use  
Mode d’emploi  
Bedienungsanleitung  
Istruzioni per l’ uso  
Manualdel Usuario  
Installationsanleitung  
Brugsanrisning  
Käyttöohje  
Zalecenia dla uýytkownika  
Kullaným Kýlavuzu  
Pykoboäctbo ïo ýkcïëyaöèè  
Instrukcja obstugi  
Bruksanvising  
 
Explanation  
Explanation  
Installation  
3
 
Important notes for users in the U.K.  
Norge  
Mains plug  
Typeskilt finnes på apparatens  
underside.  
This apparatus is fitted with an  
approved 13 Amp plug.  
To change a fuse in this type of plug  
proceed as follows:  
Observer: Nettbryteren er sekundert  
innkoplet. Den innebygde netdelen er  
derfor ikke frakoplet nettet så lenge  
apparatet er tilsluttet nettkontakten.  
1
2
Remove fuse cover and fuse.  
Fix new fuse which should be a  
BS1362 5 Amp, A.S.T.A. or BSI  
approved type.  
For å redusere faren for brann eller  
elektrisk støt, skal apparatet ikke  
utsettes for regn eller fuktighet.  
3
Refit the fuse cover.  
If the fitted plug is not suitable for your  
socket outlets, it should be cut off and  
an appropriate plug fitted in its place. If  
the mains plug contains a fuse, this  
should have a value of 5 Amp. If a plug  
without a fuse is used, the fuse at the  
distribution board should not be greater  
than 5 Amp.  
Deutschland  
Hiermit wird bescheinigt, daß dieses  
Gerät in Übereinstimmung mit den  
Bestimmungen der  
Amtsblattverfügung 1046/1984  
funkentstört ist.  
Note: The severed plug must be  
disposed of to avoid a possible shock  
hazard should it be inserted into a 13  
Amp socket elsewhere.  
Der Deutschen Bundespost wurde  
das Inverkehrbringen dieses Gerätes  
angezeigt und die Berechtigung zur  
Überprüfung der Serie auf  
Einhaltung der Bestimmungen  
eingeräumt.  
How to connect a plug  
The wires in the mains lead are  
coloured with the following code:  
blue = neutral (N), brown = live (L).  
As these colours may not correspond  
with the colour markings identifying the  
terminals in your plug, proceed as  
follows:  
Connect the blue wire to the  
terminal marked N or coloured  
black.  
Connect the brown wire to the  
terminal marked L or coloured red.  
Do not connect either wire to the  
earth terminal in the plug, marked  
E (or ) or coloured green (or green  
and yellow).  
Before replacing the plug cover, make  
certain that the cord grip is clamped  
over the sheath of the lead - not simply  
over the two wires.  
Copyright in the U.K.  
Recording and playback of material  
may require consent. See Copyright  
Act 1956 and The Performer's  
Protection Acts 1958 to 1972.  
4
 
English ...........6  
French ..........10  
German ........14  
Italian ...........18  
Spanish ........22  
Dutch ............26  
Swedish .......30  
Finish ...........34  
Polish ...........38  
Chinese ........42  
Turkish .........46  
Russian ........50  
Norwegian ....54  
Danish ..........58  
5
 
Description  
Philips Advanced Technologies  
Ultra-thin design, powerful surround audio!  
The A 3.500 Acoustic Surround Power / MMS  
305 is the result of the ultimate union of Philips  
acoustical core competencies. We created a  
multimedia multi-channel speaker system that  
features four ultra-thin soft flat panel speakers, a  
variety of mounting options and an explosive  
wOOx™ subwoofer. The set is the perfect choice  
for a space-saving hifi audio solution.  
wOOx™  
Anchored by a 40 watt subwoofer, the A 3.500  
Acoustic Surround Power / MMS 305 system  
employs Philips’ patented wOOx™ Bass Driver  
technology to generate superior bass from a  
deceptively small enclosure. The wOOx™ bass  
drivers are composed of a unique dual suspension  
design mounted in front of the subwoofer resulting  
in a deeper, richer bass performance you would  
expect from a large subwoofer. With the  
symmetrical construction of the wOOx™ Bass  
Radiator, there is complete balance of the  
membrane movement producing no discernable  
distortion. As a result, gaming effects are more  
intense and music more enjoyable.  
This Soft Flat Panel speaker system is especially  
designed as a multimedia hifi multi-channel  
speaker system. It will enhance dramatically your  
gaming and audio-visual experience. It delivers the  
ultimate sound solution for gamers by providing  
thrilling surround sound.  
All together, there can be connected up to three  
audio-visual sources at the same time directly to  
the speaker system: one 4-channel input (INPUT 1)  
for your 4-channel soundcard and two stereo inputs  
for other audio-visual devices (INPUT 2, INPUT 3).  
Soft Flat Panel Satellite Speakers  
For optimum performance, the set is best used with  
3D positional audio inputs, from e.g. 4-channel  
soundcards. The soundcard outputs for 3D  
positional audio outputs are usually marked as  
OUT 1 and OUT 2. The information provided from  
these OUT 1 and OUT 2 computer outputs will  
activate the four satellites and the subwoofer so  
that you will experience sound from all around you.  
NXT* has developed a unique loudspeaker  
technology that has redefined the shape of sound.  
Philips has taken a new step in optimising the  
implementation of NXT*’s technology by adding a  
High Frequency Booster. The High Frequency  
Booster boosts sound pressure at the higher  
frequencies, thereby enabling the use of a soft  
panel material whose sound quality matches the  
performance of most home audio systems.  
If your computer is only equipped with a stereo  
soundcard, or you’re using other stereo audio-  
visual sources as input, then the speaker system  
will operate as a stereo speaker system. The front  
and surround satellites on one side will be one  
stereo channel and the front and surround satellites  
on the other side will be the other stereo channel.  
* NXT Trade Mark of New Transducers Ltd.  
Trade Mark of New Transducers Ltd.  
All Patent Rights Reserved.  
Next to your computer, this multi-functional A3.500  
Acoustic Surround Power / MMS 305 system  
can be connected to your CD/MP3 player and  
games consoles as well. It is also possible to drive  
the speaker system from a DVD player that has  
two analog outputs.  
Ultra thin, stylish design, superb acoustic quality  
and high impact bass power from all around you.  
Flat will –from now onwards - never sound flat  
anymore, at least Philips soft flat panel speakers!  
6
 
Explanation (Illustration page 3)  
1
STANDBY  
12 INPUT 1 SURR (BLACK COLOR)  
To connect the Surround In cable - for the  
surround satellite speakers - from Out 2 at  
the soundcard/ sound source  
To switch the speaker system into ON or OFF  
(=STANDBY) mode  
2
MUTE  
To switch the speaker system into mute 13 INPUT 2 STEREO  
mode, and normal mode again  
Option to connect a stereo soundcard or an-  
other stereo audio-visual sound source  
3
4
MASTER VOLUME - / +  
To adjust the master volume higher or lower 14 INPUT 3 STEREO  
Option to connect a stereo soundcard or an-  
FADE REAR / FRONT  
To adjust the loudness of the rear and the  
front satellite speakers  
other stereo audio-visual sound source  
15 SATELLITE FR.L  
To connect the front left satellite speaker  
5
6
7
BASS - / +  
To adjust the bass level according your per- 16 SATELLITE FR.R  
sonal preference  
To connect the front right satellite speaker  
TREBLE - / +  
To adjust the presence of the higher tones  
according your personal preference  
17 SATELLITE SR.L  
To connect the surround left satellite speaker  
18 SATELLITE SR.R  
To connect the surround right satellite  
speaker  
wOOx™  
To activate wOOx™, hear a full spectrum of  
bass frequencies – ranging from the subtle  
to the extreme  
19 REMOTE IR-EYE  
To connect the remote control IR-EYE  
8
9
GAME/ SPEECH/ MUSIC  
Choose from either the game, speech or  
music button for optimal pre-set sound re-  
production per genre  
WALL MOUNTING OPTION  
The design of the satellites speakers offers  
wall mounting as an option  
INPUT 1/ INPUT 2/ INPUT 3  
Make your choice of audio-visual source se-  
lection. Two separate stereo input sources  
and one 4-channel input source can be con-  
nected to this multi-channel speaker system  
10 POWER  
This mains power cord must be connected  
to the AC outlet  
11 INPUT 1 LINE (GREEN COLOR)  
To connect the Line In cable - for the front  
satellite speakers - from Out 1 at the  
soundcard/ sound source  
7
 
Installation (Illustration page 3)  
1. Connect the LINE IN cable (green color) from  
Safety  
OUT 1 at the soundcard to INPUT 1 LINE , AND  
Do not expose the speakers to excessive heat  
(caused by heating equipment or direct  
sunlight). To reduce the risk of fire or electric  
shock, do not expose this appliance to rain or  
moisture. If fluid spills into the speakers,  
disconnect any connections immediately and  
let the speakers dry before reusing them.  
2. Connect the SURROUND IN cable (black color)  
from OUT 2 at the soundcard to INPUT 1 SURR  
(only applicable if a 4-channel soundcard is  
available), AND/OR  
3. Connect another LINE IN cable from another  
stereo audio-visual source to INPUT 2 STEREO,  
AND/OR  
You may clean the speakers with a soft, slightly  
dampened lint-free cloth. Do not use any  
cleaning agents as they may have a corrosive  
effect.  
4. Connect another LINE IN cable from another  
stereo audio-visual source to INPUT 3 STEREO  
5. Connect the front left satellite speaker to  
If the speakers do not operate, disconnect them  
from the power supply. Wait a few seconds  
before reconnecting them to the power supply.  
SATELLITE FR.L  
6. Connect the front right satellite speaker to  
SATELLITE FR.R  
7. Connect the surround left satellite speaker  
to SATELLITE SR.L  
8. Connect the surround right satellite speaker  
to SATELLITE SR.R  
9. Connect the Remote Control IR-EYE connector  
to the REMOTE IR-EYE and place the eye on top  
of your monitor/ desktop PC  
10. Connect the fixed mains power cord to the  
AC outlet  
11. Switch on (and switch off as well) the system  
using the STANDBY button on the remote  
control  
12. Tune the system using the controls on the  
soundcard/ sound source and the controls  
on the remote control  
NOTE: Do not insert the power plug into the AC  
outlet until all connections are made!  
8
 
Specifications  
Overall  
output power  
THD  
frequency response : 40 – 20,000 Hz  
cross-over frequency : 200 Hz  
magnetically compensated  
: 80 watts RMS  
: 10% @ 80 watts RMS  
Pre-amplifier  
input resistance  
input impedance  
clipping level  
distortion  
digital volume  
bass  
treble  
: 100K ohms  
: >10K ohms  
: 2V RMS  
: 0.05%  
: 50 steps @ 1.25dB per step  
: 8± 2dB per step  
: 8± 2dB per step  
Satellites  
drivers  
:
:
:
:
8 ohms Soft Flat 3.25”x5.0”  
4 x 10 watts RMS @ 10% THD  
4 x 8 watts RMS @ 0.5% THD  
4 x 1 watts RMS @ 0.05% THD  
output power  
frequency response : 200 – 20,000 Hz  
Subwoofer  
drivers  
:
:
:
:
5.25” super woofer + 6” wOOx  
2 x 20 watts RMS @ 10% THD  
2 x 15 watts RMS @ 0.5% THD  
2 x 1 watts RMS @ 0.05% THD  
output power  
frequency response : 40 – 200 Hz  
Remote Control  
# of functions  
: 17 key buttons  
Dimensions  
satellites  
:
:
158 (H) x 82 (W) x 81 (D) mm  
228 (H) x 190 (W) x 266 (D) mm  
subwoofer  
remote control  
packaging  
: 168 (L) x 38 (W) x 17 (D) mm  
: 284 (H) x 232 (W) x 384 (D) mm  
Weight  
satellites  
subwoofer  
: 4 x 0.23 kg  
: 3.7 kg  
System Requirements  
preferred  
: 4-channel soundcard  
: stereo soundcard, MP3/ CD/  
Cassette player, game  
consoles  
other possibilities  
9
 
PHILIPS CONSUMER ELECTRONICS COMPANY  
A Division of Philips Electronics North America Corporation  
Knoxville, Tennessee 37914-1810, U.S.A.  
Printed in Malaysia  
4399 294 47613  
62  
 

Peavey Stereo Amplifier IA 200 User Manual
Peerless Industries Projector PJRL411 User Manual
Pelco TV Mount C242M C User Manual
Philips Cassette Player AZ122 User Manual
Philips Digital Photo Frame 25SL5766 User Manual
Philips DVD Player DVD723 User Manual
Philips Indoor Furnishings 31603 31 16 User Manual
Planar Car Video System PT1501M User Manual
Poulan Tiller 164778 User Manual
Poulan Tiller 413157 User Manual