Philips Stereo System AEA2000 User Manual

Always there to help you  
Register your product and get support at  
AEA2000  
Question?  
Contact  
Philips  
User Manual  
 
1 Important  
2 Your Bluetooth  
Adapter  
Read these instructions.  
Follow all instructions.  
Do not use this apparatus near water.  
Do not place near any heat sources such  
as radiators, heat registers, stoves, or  
other apparatus (including amplifiers) that  
produce heat.  
Introduction  
By connecting the Bluetooth adapter to your  
Hi-Fi speaker system, you can enjoy audio from  
your Bluetooth-enabled device on your Hi-Fi  
system through Bluetooth wireless connection.  
Protect the power cord from being  
walked on or pinched, particularly at plugs,  
convenience receptacles, and the point  
where they exit from the apparatus.  
Only use attachments/accessories specified  
by the manufacturer.  
Unplug this apparatus during lightning  
storms or when unused for long periods  
of time.  
What's in the box  
Check and identify the contents of your  
package:  
Refer all servicing to qualified service  
personnel. Servicing is required when  
the apparatus has been damaged in any  
way, such as power-supply cord or plug  
is damaged, liquid has been spilled or  
objects have fallen into the apparatus, the  
apparatus has been exposed to rain or  
moisture, does not operate normally, or  
has been dropped.  
Main unit  
AC power adaptor  
RCA audio cable  
User manual  
Apparatus shall not be exposed to  
dripping or splashing.  
Do not place any sources of danger on the  
apparatus (e.g. liquid filled objects, lighted  
candles).  
Where the plug of the Direct Plug-in  
Adapter is used as the disconnect device,  
the disconnect device shall remain readily  
operable.  
Warning  
Never remove the casing of this apparatus.  
Never place this apparatus on other electrical  
equipment.  
Ensure that you always have easy access to the power  
cord, plug or adaptor to disconnect the apparatus from  
the power.  
3
EN  
 
3 Play  
Connect power  
Caution  
Always follow the instructions in this chapter in  
sequence.  
Risk of product damage! Make sure that the power  
supply voltage matches the voltage printed on the  
bottom of the unit.  
Risk of electric shock! Hold the plug securely when  
unplugging the device.  
Connect audio cables  
There are two ways to connect the Bluetooth  
adaptor to your Hi-Fi system. Select one fit for  
the Hi-Fi system.  
Note  
The type plate is located on the bottom of the  
Bluetooth adaptor.  
Option 1 (Fig.A)  
Connect the power adaptor to:  
the DC IN socket at the back of the  
Bluetooth adapter.  
the wall outlet.  
R
L
AUDIO IN  
Option 2 (Fig. B)  
Enter pairing mode  
When connected to power, the Bluetooth  
adaptor goes to Bluetooth pairing mode  
automatically.  
LINE OUT  
R
L
If your Bluetooth device has not been  
paired with the Bluetooth adapter before,  
you need pair with the Bluetooth adapter  
first, then play audio on the device (See  
the section “Play from Bluetooth-enabled  
devices”).  
EN  
4
 
If your Bluetooth device has been paired  
with the Bluetooth adapter before, press .  
2 When [PhilipsBT] (Philips Bluetooth  
adapter) is displayed on your device,  
select it to start pairing and connection. If  
necessary, enter default password “0000”.  
» If connection is successful, the  
Bluetooth indicator becomes solid  
blue.  
» The Bluetooth adapter attempts to connect  
the previously connected Bluetooth device.  
If it fails, the adapter returns to the pairing  
mode.  
3 Play audio on your device.  
» Audio streams from your device to  
your Hi-Fi system.  
Tip  
If the Bluetooth adapter fails to pair with a Bluetooth  
device, the Bluetooth adapter exits the pairing mode  
in 2 minutes, and the LED light becomes dim.You can  
press to return to pairing mode.  
Note  
LED  
indications  
Solid blue  
Description  
If your Bluetooth device has been paired with AEA2000  
before, you just need to find out [PhilipsBT] on your  
Bluetooth menu, then start the connection.  
This Bluetooth adaptor can memorize up to 8  
previously paired devices.  
The Bluetooth adapter and your  
Bluetooth-enabled device are  
connected.  
Flashing  
blue  
The Bluetooth adapter is waiting  
to be paired with a Bluetooth-  
enabled device.  
The Bluetooth adapter is neither  
in connection with a Bluetooth  
device nor in the pairing mode.  
To disconnect the Bluetooth-enabled device:  
Press again;  
Tap [PhilipsBT] on the Bluetooth menu  
again;  
Dim light  
Deactivate Bluetooth function on your  
device; or  
Move the device beyond the  
communication range.  
To connect another Bluetooth device:  
Play from Bluetooth-enabled  
devices  
1 Disconnect the previously connected  
device.  
2 Pair with your selected Bluetooth device.  
Note  
To clear pairing history in the Bluetooth  
adapter:  
Press and hold for 7 seconds.  
» The Bluetooth indicator stays in solid blue  
for 2 seconds, then returns to the previous  
status.  
The effective operating range between the Bluetooth  
adapter and the paired device is approximately 10  
meters (30 feet).  
Keep this Bluetooth adapter away from other electronic  
devices that may cause interference.  
Compatibility with all Bluetooth devices is not  
guaranteed.  
Make sure that the Bluetooth adapter is connected to  
the powered Hi-Fi system correctly.  
Make sure that your Hi-Fi system is in Audio-in or  
line-in mode.  
1 On your Bluetooth device, turn on  
Bluetooth function and search for  
Bluetooth devices (refer to the device's  
user manual).  
5
EN  
 
4 Product  
information  
5 Troubleshooting  
Warning  
Never remove the casing of this device.  
Note  
Product information is subject to change without prior  
notice.  
To keep the warranty valid, never try to repair  
the system yourself.  
If you encounter problems when using this  
device, check the following points before  
requesting service. If the problem remains  
unsolved, go to the Philips Web page  
(www.philips.com/support).When you contact  
Philips, make sure that the device is nearby  
and the model number and serial number are  
available.  
Specifications  
Amplifier  
OutputVoltage  
Signal to Noise Ratio  
Total Harmonic Distortion  
1000 mV RMS  
> 62 dBA  
< 2 %  
No power  
Make sure that the AC power adapter is  
connected properly.  
Make sure that there is power at the AC  
outlet.  
Bluetooth  
Standard  
Bluetooth StandardVersion  
2.1+EDR  
No sound from your Hi-Fi system  
Check if the Hi-Fi system is connected to  
power.  
Make sure that the system is connected  
with the Bluetooth adapter properly.  
Make sure that the Bluetooth wireless  
connection is successful.  
Adjust the volume of your system and  
Bluetooth device.  
Make sure that the Hi-Fi system is in  
Audio-in or line-in mode.  
Frequency Band 2.402~2.480 GHzISM Band  
Range 10m (free space)  
General information  
AC Power  
Model:AS030-090-  
EE033/EML0900330V  
(Philips);  
Input: 100-240V ~,  
50/60 Hz, 0.15 A;  
Output: 9V 0.33 A  
Operation Power  
Consumption  
About Bluetooth device  
< 3 W  
Dimensions - Main Unit  
(W x H x D)  
Weight - Main Unit  
The audio quality is poor after connection  
with a Bluetooth-enabled device.  
74 x 28 x 72 mm  
0.04 kg  
The Bluetooth reception is poor. Move the  
device closer to the Bluetooth adaptor or  
remove any obstacle between the device  
and the adaptor.  
EN  
6
 
Cannot connect with the device.  
6 Notice  
The Bluetooth function of the device is not  
enabled. Refer to the user manual of the  
device for how to enable the function.  
The adapter is already connected with  
another Bluetooth-enabled device.  
Any changes or modifications made to this  
device that are not expressly approved by  
WOOX Innovations may void the user’s  
authority to operate the equipment.  
Disconnect that device and then try again.  
The paired device connects and disconnects  
constantly.  
The Bluetooth reception is poor. Move the  
device closer to the Bluetooth adapter or  
remove any obstacle between the device  
and the adapter.  
This product complies with the radio  
interference requirements of the European  
Community.  
A copy of the EC declaration of Conformity  
is available in the Portable Document Format  
(PDF) version of the user manual at  
For some devices, the Bluetooth  
connection may be deactivated  
automatically as a power-saving feature.  
This does not indicate any malfunction of  
the system.  
Recycling  
Your product is designed and manufactured  
with high quality materials and components,  
which can be recycled and reused.  
When you see the crossed-out wheel bin  
symbol attached to a product, it means the  
product is covered by the European Directive  
2002/96/EC:  
Never dispose of your product with other  
household waste. Please inform yourself about  
the local rules on the separate collection of  
electrical and electronic products.The correct  
disposal of your old product helps prevent  
potentially negative consequences on the  
environment and human health.  
7
EN  
 
Environmental information  
All unnecessary packaging has been omitted.  
We have tried to make the packaging easy to  
separate into three materials: cardboard (box),  
polystyrene foam (buffer) and polyethylene  
(bags, protective foam sheet.)  
Your system consists of materials which can  
be recycled and reused if disassembled by  
a specialized company. Please observe the  
local regulations regarding the disposal of  
packaging materials, exhausted batteries and old  
equipment.  
The Bluetooth® word mark and logos are  
registered trademarks owned by Bluetooth  
SIG, Inc. and any use of such marks by WOOX  
Innovations is under license.  
2013 © WOOX Innovations Limited.All rights  
reserved.  
Specifications are subject to change without  
notice.WOOX reserves the right to change  
products at any time without being obliged to  
adjust earlier supplies accordingly.  
EN  
8
 
Specifications are subject to change without notice.  
2013 ©WOOX Innovations Limited.All rights reserved.  
This product was brought to the market by WOOX  
Innovations Limited or one of its affiliates, further  
referred to in this document asWOOX Innovations, and  
is the manufacturer of the product.WOOX Innovations  
is the warrantor in relation to the product with which  
this booklet was packaged. Philips and the Philips Shield  
Emblem are registered trademarks of Koninklijke Philips  
N.V.  
AEA2000_12_UM_V3.0  
 

Peerless Industries TV Mount DS VW760 User Manual
Philips Projection Television 55P8288 User Manual
Philips Stereo System SGP6024BB User Manual
Philips Surge Protector SPP4220WA User Manual
Pioneer Stereo Receiver SX LX03 User Manual
Pioneer TV Video Accessories AVH 170DVD User Manual
Poulan Trimmer 530164435 User Manual
Princess Household Appliances BV CRT Television 68CT8 User Manual
ProForm Home Gym PFEL4501 User Manual
PS Audio Stereo Amplifier PCA 2 User Manual