Planar Car Video System PXL2240MW User Manual

PXL2240MW  
Touch LED LCD Monitor  
USER'S GUIDE  
 
Content  
Operation Instructions...................................................................................................................................................1  
Unpacking Instructions .................................................................................................................................................2  
Safety Precautions...........................................................................................................................................................2  
Package Overview ...........................................................................................................................................................3  
Front View of the Product ............................................................................................................................................4  
Rear View of the Product ..............................................................................................................................................5  
Quick Installation .............................................................................................................................................................6  
Basic Operation and Calibration/Reset Instructions...........................................................................................7  
Advanced Operation—OSD Menu............................................................................................................................9  
Supporting Timing Modes ........................................................................................................................................ 12  
Technical Information................................................................................................................................................. 13  
Wall-Mount Installation Instructions..................................................................................................................... 14  
Troubleshooting............................................................................................................................................................ 15  
Planar Support ............................................................................................................................................................... 16  
 
Operation Instructions  
Thank you for purchasing the PXL2240MW multi-touch LED monitor. Please read this guide  
thoroughly before installation.  
FCC RADIO FREQUENCY INTERFERENCE STATEMENT  
WARNING: (FOR FCC CERTIFIED MODELS)  
This  
has been tested and found compliant with the limits for a Class B digital device,  
LED Monitor  
pursuant to part 15 of the FCC Rules. These limits are designed to provide proper protection  
against harmful interference to a residential installation. This generates,  
Touch LED LCD Monitor  
uses, and can radiate radio frequency energy. Harmful interference to radio communication may  
be the result if it‘s not properly installed and used. However, there is no guarantee that  
interference will not occur in a particular installation. If this  
does cause  
Touchscreen LED Monitor  
serious interference to radio or television reception, resetting may correct it. Moreover, users are  
encouraged to reduce interference by doing one or more of the following:  
Reorient or relocate the receiving antenna.  
Move the  
and the receiver further away from each other.  
Touch LED LCD Monitor  
Connect the  
into an outlet on a circuit different from that to which  
Touch LED LCD Monitor  
the receiver is connected.  
Consult your local dealer or a qualified technician.  
FCC Warning:  
To assure a continued FCC compliance, a user must use a grounded power supply cord and the  
provided shielded video interface cable with bonded ferrite cores. Also, any unauthorized  
changes or modifications to this  
operate this device.  
would void the user‘s authority to  
Touch LED LCD Monitor  
Note: If necessary, shielded interface cables and AC power cord must be used to meet the  
emission level limits.  
According to WEEE regulation, this Touch LED LCD Monitor can't be handled as normal trash in Europe when  
it is out of usage. Please refer to the recycle information on Planar’s website to handle it.  
1
 
Unpacking Instructions  
Move the Touch LED LCD Monitor out of the package and take off the plastic bag and  
Polystyrene Foam.  
Pull the base from Parallel versus Panel to Vertical.  
Adjust the Panel between 4° leaning forward and 40° leaning backward.  
Safety Precautions  
Follow all warnings, precautions and maintenance as recommended in this user’s manual to  
maximize the life of your unit.  
Do:  
Turn off the product before cleaning.  
Touch screen surface may be cleaned using a soft clean cloth moistened with mild window  
glass commercial cleaners or 50/50 mixture of water and isopropyl alcohol.  
Use a soft cloth moistened with mild detergent to clean the display housing.  
Disconnect the power plug from AC outlet if the product is not going to be used for an  
extended period of time.  
Don’t:  
Do not touch the LED Display screen surface with sharp or hard objects.  
Do not use abrasive cleaners, waxes or solvents for your cleaning.  
Do not operate the product under the following conditions:  
o
o
o
o
Extremely hot, cold or humid environment.  
Areas susceptible to excessive dust and dirt.  
Near any appliance generating a strong magnetic field.  
In direct sunlight.  
If smoke, abnormal noise or odor emits from your Touch LED LCD Monitor, remove the power  
cord immediately and call your service center.  
Never remove the rear cover of your Touch LED LCD Monitor. The display unit inside contains  
high-voltage parts and may cause electric shock.  
Touch LED LCD Monitor  
Never try to repair your yourself. Always call your service center or a  
qualified technician to fix it.  
Due to safety concerns, if the VESA mounting kit is purchased separately, please  
make sure the mounting kit is UL-listed, and replaceable only by service personnel.  
2
 
Package Overview  
Touchscreen LED Monitor  
Power Cord  
VGA Signal Cable  
Audio-in Cable  
USB Cable (A to B)  
HDMI Cable  
User’s Guide  
3
 
Front View of the Product  
① ② ③ ④⑤⑥  
OSD Turn On/ Off  
Volume Adjust/ Scroll Down/ Adjust Decrease  
Preset Mode/ Scroll UP/ Adjust Increase  
Input select/ Confirm Selection  
LED Indicator  
Power On/ Off  
* Hot keys Instructions please seeUsing the OSD Menuon page 7.  
4
 
Rear View of the Product  
③ ④ ⑤  
Power Input  
USB - Type A to B  
Headphone Jack  
Audio Input  
HDMI input (HDMI 19 pin)  
DVI Input (DVI 24 pin)  
VGA Input (D-Sub 15 pin)  
5
 
Quick Installation  
Connect either VGA, DVI or HDMI Video Source from the monitor to the computer. Make  
sure both monitor and computer are powered OFF.  
1.  
2. Connect the audio cable from audio output of computer to the audio input of the monitor.  
3. Connect the USB cable from the computer to the monitor.  
4. Connect power cord to a properly grounded AC outlet, and then to the monitor.  
5. Power-ON computer and then POWER-ON the monitor.  
6. Set the timing mode on your computer. Recommended resolution and refresh rate is 1920 x  
1080 @ 60Hz.  
Figure 1:  
PC  
Audio cable  
USB 2.0 cable  
DVI cable  
VGA cable  
Power cable  
HDMI cable  
(not supplied)  
6
 
Basic Operation and Calibration/Reset Instructions  
Before using the Touch LED LCD Monitor:  
Connect external equipment properly.  
Insert the power plug, and the power LED indicator will light orange.  
Power On/Off  
To turn the Touch LED LCD Monitor on/off:  
Press POWER button on the front. The power LED indicator light will be blue when the  
Touchscreen LED Monitor is on.  
Using the OSD Menu  
Use OSD menus to adjust settings by using the menu button on the front of the Touchscreen  
LED Monitor.  
Displays main menu  
1
Exits from OSD menu  
2
Selects between VGA, DVI, HDMI or Auto mode  
Select the desired item when in OSD menu  
When not in OSD menu, directly enters Volume adjust  
Select the desired item when in OSD menu  
When not in OSD menu, directly enters Preset Mode  
+ Recalls both Contrast and Brightness (when not in OSD menu)  
OSD Lock Out Function  
When Touchscreen LED Monitor is in normal mode, the “OSD Lock Out” function can be enabled.  
Option 1: OSD lock – all 4 buttons are locked except the “POWER” button.  
Press and hold the 1 button and the button for 3 seconds to lock the OSD buttons.  
The Touch LED LCD Monitor will show an “OSD Locked” message for 3 seconds and the message  
will disappear automatically.  
Repeat this step to unlock.  
7
 
Option 2: OSD & Power button lock – all 5 buttons including the “POWER” button are locked.  
Press and hold the 1 button and the button for 3 seconds to lock all 5 buttons.  
The Touchscreen LED Monitor will show a “Power Button Locked” message for 3 seconds and the  
message will disappear automatically.  
Repeat this step to unlock.  
PXL2240MW Calibration/Reset Instructions:  
The PXL2240MW is available with USB connection. It is Microsoft® Windows® 7, 8 HID (Human  
Interface Device) compatible if you use the USB touch screen interface. No additional software  
driver is required. Calibration is a simple process and can be invoked by running Tablet PC  
Settings from Control Panel and clicking the Calibrate button.  
Click the Reset button to reset the touchscreen to the factory calibration settings. To reset the  
existing calibration data, click "Reset" in the Tablet PC Settings window.  
8
 
Advanced Operation—OSD Menu  
You can use the OSD menu to adjust various settings for your Touchscreen LED Monitor.  
Press the 1 button to display the OSD Menu, and use ▲▼ to select the desired OSD menu.  
Short Cuts Function from the button(s)  
Auto Image Adjust: To auto adjust Horizontal Position, Vertical Position, Phase (Fine  
Tune) and Clock (H. Size) of the screen.  
Contrast: To adjust the foreground white level of screen image.  
: increase contrast, : decrease contrast.  
Brightness: To adjust the luminance of the video.  
: increase brightness, : decrease brightness.  
ECO Mode: Allows the user to turn the ECO On or Off. Contrast and Brightness  
adjustment disabled when ECO is active.  
Over Drive: Allows the user to turn the Over Drive On or Off. Improve the quality of the  
motion pictures.  
9
 
Input Select: When Input Select is pressed, change Input signal to VGA, DVI, HDMI or  
Auto.  
Audio Adjust: To adjust the audio functions.  
Volume: To adjust the volume of speaker output.  
Mute: To turn the Mute ON/OFF.  
Audio Input: When in HDMI input, select where the audio source comes from Line-In or  
HDMI.  
Color Adjust: To select the color for improving brightness and color saturation  
between Cool, Normal, Warm, User Color and Preset Mode.  
Cool: Adds blue to screen image for cooler white.  
Normal: Adds red to screen image for warmer white and richer red.  
Warm: Adds green to screen image for a darker color.  
User Color: Individual adjustments for red (R), green (G), blue (B).  
1. Press button 2 to select the desired color.  
2. Press or button to adjust selected color.  
Preset Mode: Provides an optimum display environment depending on the contents  
displayed. It contains 5 user-selectable presets.  
Standard is for general windows environment and monitor default setting.  
Game optimized for PC game environment.  
Cinema optimized for movie and video environment.  
Scenery optimized for displaying outdoor scenery images.  
Text optimized for text editing and viewing in a word processing environment.  
Information: To display the information, regarding the current input signal coming  
from the graphic card in your computer.  
Note: See your graphic card user guide for more information about changing the  
resolution and refresh rate.  
Manual Image Adjust: To manually adjust the H. / V. position, Clock, Phase, Sharpness  
and Video Mode adjust.  
H. / V. Position: To adjust the horizontal and vertical position of the video.  
H. Position: : move screen to the right, : move screen to the left.  
V. Position: : move screen up, : move screen down.  
Clock: To adjust the width of the screen image.  
: increase the width of screen image, : decrease the width of screen image.  
Phase: To adjust the delay time of data and clock.  
Press or to adjust to your preference.  
10  
 
Sharpness: To adjust the clarity of a non-Full HD Resolution (1920x1080) signal with ▼  
or button.  
Video Mode Adjust: To select the video mode from Full Screen or Aspect Ratio.  
Full Screen: To select full-screen size image.  
Aspect Ratio: To select input timing image size.  
Setup Menu: To set up Language Select, OSD Position, OSD Time Out, OSD  
Background and Power Indicator.  
Language Select: To allow users to choose from available languages.  
OSD Position: Press or button to select between horizontal and vertical OSD  
Position adjustment.  
OSD H. Position: To horizontally adjust the OSD position.  
: move OSD to the right, : move OSD to the left.  
OSD V. Position: To vertically adjust the OSD position.  
: move OSD up, : move OSD down.  
OSD Time Out: To automatically turn off On Screen Display (OSD) after a preset period  
of time.  
OSD Background: Allows the user to turn the OSD background On or Off.  
Power Indicator: Allows the user to turn the LED Indicator On or Off.  
Memory Recall: To recall factory settings for Video & Audio controls.  
Press button 2 to select the Memory Recall menu option.  
11  
 
Supporting Timing Modes  
STANDARD  
VGA  
RESOLUTION  
720 x 400 @ 70Hz  
640 x 480 @ 60Hz  
640 x 480 @ 67Hz  
640 x 480 @ 72Hz  
640 x 480 @ 75Hz  
800 x 600 @ 56Hz  
800 x 600 @ 60Hz  
800 x 600 @ 72Hz  
800 x 600 @ 75Hz  
832 x 624 @ 75Hz  
1024 x 768 @ 60Hz  
1024 x 768 @ 70Hz  
1024 x 768 @ 75Hz  
1280 x 960 @ 60Hz  
1152 x 864 @ 75Hz  
1152 x 870 @ 75Hz  
1280 x 1024 @ 60Hz  
1280 x 1024 @ 75Hz  
1440 x 900 @ 60Hz  
1400 x 1050 @ 60Hz  
1600 x 1200 @ 60Hz  
1680 x 1050 @ 60Hz  
1920 x 1080 @ 60Hz  
VGA  
MAC  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
MAC  
VESA  
VESA  
VESA  
VESA  
VESA  
MAC  
VESA  
VESA  
VESA  
CVT  
VESA  
VESA  
VESA  
Note:  
1. DVI and HDMI supports 480i, 480p, 576i, 576p, 720p, 1080i, and 1080p.  
2. Simultaneously press 1 and 2 keys on monitor panel to switch between similar PC timings.  
Similar PC Timing on list below:  
720 x 400 @ 70Hz / 640 x 400 @ 70Hz  
720 x 480 @ 60Hz / 640 x 480 @ 60Hz  
1400 x 1050 @ 60Hz / 1680 x 1050 @ 60Hz  
Warning: Do not set the graphic card in your computer to exceed these maximum refresh rates.  
Doing so may result in permanent damage to your monitor.  
12  
 
Technical Information  
Panel  
21.5” TFT (with LED backlight)  
On: 24 Watts (typical), 35 Watts (maximum)  
Standby Mode: < 0.5 Watt  
Off: < 0.5 Watt  
Power Management  
Displayable Resolution  
Pixel Dimension  
Display Color  
Full HD 1920 x 1080 max. Vertical Frequency 60Hz max.  
0.24825 x 0.24825 mm  
16.7M  
Tilt  
4° (+3/-3) ~ 40° (+3/-3)  
Active Display Area  
Temperature  
476.64 mm x 268.11 mm  
Operating: 0°C ~ +40°C  
Storage: -20°C ~ + 60°C  
Compliance  
Power  
FCC-B, CE, UL/cUL  
Input Voltage AC100-240 V  
1W x 2 (typical)  
Amplifier spec.  
Touchscreen Technology Optical Touch  
Touchscreen Interface  
Touch Method  
USB  
Finger(s) and stylus input  
Microsoft Windows® 7, 8  
Supported O/S  
13  
 
Wall-Mount Installation Instructions  
Wall Mount Arm not included  
Turn the power OFF then disconnect the cables from the TFT  
Touchscreen LCD Monitor before performing the procedure  
below.  
1. Lay the TFT Touchscreen LCD Monitor face down on a soft  
surface.  
2. Remove the 2 screws holding the stand to the hinge.  
3. Remove the stand.  
4. Follow instructions included with the Wall Mount Kit.  
NOTE  
100mmx100mm VESA hole pattern (n=4), M4, pitch =0.7 mm  
100mm x 100mm Screw  
Mounting Options  
14  
 
Troubleshooting  
No power  
Make sure A/C power cord is securely connected to the power adapter and the power supply  
Touchscreen LED Monitor  
is firmly connected to the  
.
Plug another electrical device into the power outlet to verify that the outlet is supplying  
proper voltage.  
Make sure all signal cables are installed.  
Power on but no screen image  
Touchscreen LED Monitor  
Make sure the video cable supplied with the is tightly secured to  
the video output port on back of the computer. If not, tightly secure it.  
Adjust brightness.  
Wrong or abnormal colors  
If any colors (red, green, blue) are missing, check the video cable to make sure it is securely  
connected. Loose or broken pins in the cable connector could cause an improper connection.  
Touchscreen LED Monitor  
Connect the  
to another computer.  
Burn-In  
LED/LCD displays are subject to screen burn in (image retention). It’s not recommended to  
have a static image on the LCD/LED for more than 4 hours.  
15  
 
Planar Support  
Cables and Accessories  
To find cables and accessories for your Planar monitor, touch screen or other Planar products  
visit our online store at www.PlanarOnline.com.  
Technical Support  
warranty information and access to Planar's Technical Library for online trouble shooting.  
To speak with Planar Customer Support please have your model and serial number available  
and dial:  
Planar Support  
Tel: 1-866-PLANAR1 (866-752-6271) or +1 503-748-5799 outside the US.  
Hours: 24 hours a day, 7 days a week.  
Toll or long distance charges may apply.  
16  
 

Pelco Security Camera SS3512 User Manual
Philips Baby Accessories SCF175 11 User Manual
Philips DVD Player PD9030 User Manual
Philips Projection Television 51PP9363H User Manual
Philips Stereo Amplifier TDA2611A User Manual
Philips Stereo System CDC 586 User Manual
Philips TV Receiver 502 1040510 User Manual
Philips TV VCR Combo 14PV405 User Manual
Planet Technology TV Converter Box GT 902 User Manual
Poulan Trimmer 545186897 User Manual