Polaroid Digital Camera IM1836BLK User Manual

front  
4: Charge the battery using the USB  
connection cable (included) and the  
AC Adapter (included).  
Troubleshooting for Polaroid iM1836  
- Connect one end of the USB cable into  
the USB port on your camera.  
UNDERSTANDING YOUR DEVICE  
- Connect the other end of the USB cable to  
the AC Adapter and then plug the AC  
Adapter into a power socket.  
YOUR ANDROID CAMERA HAS TWO MAIN MODES--CAMERA MODE & ANDROID MODE.  
BOTH THESE MODES USE THE MICRO SD CARD AS ITS STORAGE DEVICE. SINCE THE STORAGE  
IS SHARED,WE STRONGLY RECOMMENDED THAT YOU FINISH AN OPERATION IN EITHER  
MODE BEFORE.SWITCHING TO THE OTHER.  
battery is fully charged.  
Push the battery latch  
open to insert the battery.  
Several things might prevent the camera  
from turning on. First make sure that the  
battery is inserted correctly. Make sure to  
insert the lithium battery all the way into  
the battery compartment .  
The battery latch should cover the battery  
when inserted correctly.  
Troubleshooting for Polaroid iM1836  
Make sure the battery is charged.  
charged.  
1.  
2. To charge your battery, insert the battery correctly into the camera and make sure the  
camera is powered o". Then follow one of the steps above to charge the battery:  
3. Your camera will charge only on the android mode. If your camera is on the camera mode  
and you try to charge , it will automatically turn to the android mode and continue to  
charge. If you try to turn on to the camera mode when charging you will receive the  
message, CANNOT TURN ON CAMERA MODE WHEN CHARGING - DISCONNECT CHARGING TO USE  
CAMERA MODE Stop charging if you want to use your camera in charge mode.  
LED light turns to yellow  
color means battery  
charging…  
Wait until LED light OFF  
Battery Fully Charged.  
1
2
back  
Camera does not turn on.  
Flash is not working.  
Micro SD Card is not working.  
Make sure that the Micro SD Card is inserted  
correctly into the camera’s Micro SD Card slot.  
1. Make sure your battery is fully charged. we recommended you charge the battery  
for 2 hours using the supplied wall charger.  
2. Make sure you have inserted the battery correctly.  
Make sure the flash light opened and settings on your camera are  
turned on.Your camera has four flash settings: O" Flash, Auto  
Flash ,Red Eye Reduction and Force on Flash. Click the Flash icon  
on the screen, then will display a #ash window as the right image  
shown:  
3. HOLD the "ON/ OFF" button for a few seconds to turn on.  
O" Flash (Default): No flash will appear.  
Use this when you do not want to activate flash.  
Cannot Transfer Pictures.  
A
1
A
Auto Flash: The camera will automatically determine  
when Flash is needed according to the lighting conditions.  
1. Make sure your camera is connected to a USB port on your computer using the  
included USB cable.  
2. Make sure that both your camera and your computer are powered on,  
open your camera,there will be shown a USB connecting icon on top left corner of  
the screen,touch the icon and slide it down, will shown a dialog box, click USB  
connected, then click open USB storage,click OK,you will see the android  
logo will turn to orange color from green color, it means, you can !nd your device in  
My Computer window ( the COMPUTER WINDOW if your computer  
is running Windows Vista or Windows 7, For Window XP system,you have to install a  
media player 10.1 or above for using ) in your computer.labeled Removable Disk.  
Double-clicking this drive will access a folder, containning your images. if you are  
using a Mac, an extra drive will access a folder, containing your images.  
3. You can also use the included software to assist you in transferring photos form your  
camera to your computer,if the computer fails to recognize that a camera is plugged in,  
try using a di"erent USB port on your computer. If you are using your computer's card  
reader or an external card reader make sure the micro SD card is inserted securely and  
in the correct position.  
Red Eye Reduction: Flash that eliminates the red-eye in photo  
caused by the flash.  
You will need to push the Micro SD card into  
the slot until you hear a slight clicking sound  
which indicates that the Micro SD card is inserted  
properly.  
Force on #ash : The flash is ON for each photo.  
following:  
You need to manually open the #ash before switching  
the #ash mode.  
2
Make sure you have selected one of the Flash options:  
Auto Flash, Red Eye Reduction and Force on #ash.  
If the battery power in #ash is low, try replacing the batteries  
Make sure there is room on the Micro SD Card for  
additional pictures. If the Micro SD Card is full,  
additional pictures will not be added to the card.  
with new ones since the flash requires  
a
good amount of  
battery power.  
Q) I get a FILE ERROR when deleting the images. How do I !x this issue?  
WIFI SIGNAL DETECTED  
A) Typically, this sort of error occurs when there are !les on your Micro SD memory card that are not  
supported by your camera. To avoid getting this error message, copy all !les and folders on your  
memory card to your computer or any other mass storage device, and then delete them o" of your  
memory card before inserting it in your camera . You may also try formatting your memory card  
before inserting it in your camera, but please note that this will permanently delete all !les currently  
stored on the memory card. For best results, we recommend using a separate Micro SD card exclusively  
with your camera.  
3
If your wi! is on and you try to switch to the camera mode , you will receive this  
noti!cation . since your wi! is ON---the camera wants to make sure you are not  
between any data transfer like uploading / downloading media !les or downloading  
apps form the app store , etc . Since switching to the camera mode will stop this  
transfer,we want you to con!rm that you are OK , if you don't want to receive this  
message in future Check the box "DO NOT REMIND ME AGAIN "and click OK . This will  
stop this noti!cation.  
MICRO SD  
“Click”!  
Q) When scrolling through my pictures and videos In the playback mode, my screen freezes.  
How do I !x this issue?  
A) This often happens when your Micro SD card has other !les stored in it that are not supported by  
the camera. To !x the problem:  
1) Transfer the other !les/folders to your computer or to another storage device and then delete them  
from your micro SD card.  
2) Remove the batteries and then insert reinsert them in order to restart the camera.  
3) Insert the micro SD card into the camera.  
4
4) For best results, we recommend using a separate micro SD card exclusively with your camera.  
4
3
5
 

Peavey Musical Instrument Amplifier 210 TXR User Manual
Philips Battery Charger LR14PB4C User Manual
Philips Car Speaker SB365 User Manual
Philips Cell Phone MT3120 User Manual
Philips DVD Recorder DVR2008 User Manual
Philips MP3 Player SA9344 00 User Manual
Philips TV Cables SWA2520T User Manual
Philips Work Light 377200 User Manual
Pioneer Marine Radio MVH P8200 User Manual
Polaris Offroad Vehicle 600 RMK 144 155 User Manual